[
  {
    "manufacturer_preset": "CaiLab PETG Generic @Bambu Lab H2D 0.4 nozzle",
    "compatible_printers": [
      "Bambu Lab H2D 0.4 nozzle"
    ],
    "settings_reference": {
      "name": "CaiLab PETG Generic @Bambu Lab H2D 0.4 nozzle",
      "inherits": "",
      "filament_type": [
        "PETG"
      ],
      "compatible_printers": [
        "Bambu Lab H2D 0.4 nozzle"
      ],
      "filament_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
      ],
      "nozzle_temperature_initial_layer": [
        "255",
        "255"
      ],
      "nozzle_temperature": [
        "255",
        "255"
      ],
      "textured_plate_temp_initial_layer": [
        "70"
      ],
      "textured_plate_temp": [
        "70"
      ],
      "filament_flow_ratio": [
        "0.95",
        "0.95"
      ],
      "filament_max_volumetric_speed": [
        "13",
        "13"
      ],
      "fan_min_speed": [
        "10"
      ],
      "fan_max_speed": [
        "40"
      ],
      "close_fan_the_first_x_layers": [
        "3"
      ],
      "overhang_fan_speed": [
        "90"
      ],
      "additional_cooling_fan_speed": [
        "0"
      ],
      "chamber_temperatures": [
        "0"
      ]
    },
    "format": "Reference extract only; not an importable Bambu Studio preset."
  },
  {
    "manufacturer_preset": "CaiLab PETG Generic @Bambu Lab X1 Carbon 0.4 nozzle",
    "compatible_printers": [
      "Bambu Lab X1 Carbon 0.4 nozzle"
    ],
    "settings_reference": {
      "name": "CaiLab PETG Generic @Bambu Lab X1 Carbon 0.4 nozzle",
      "inherits": "",
      "filament_type": [
        "PETG"
      ],
      "compatible_printers": [
        "Bambu Lab X1 Carbon 0.4 nozzle"
      ],
      "filament_extruder_variant": [
        "Direct Drive Standard"
      ],
      "nozzle_temperature_initial_layer": [
        "255"
      ],
      "nozzle_temperature": [
        "255"
      ],
      "textured_plate_temp_initial_layer": [
        "70"
      ],
      "textured_plate_temp": [
        "70"
      ],
      "filament_flow_ratio": [
        "0.95"
      ],
      "filament_max_volumetric_speed": [
        "13"
      ],
      "fan_min_speed": [
        "10"
      ],
      "fan_max_speed": [
        "40"
      ],
      "close_fan_the_first_x_layers": [
        "3"
      ],
      "overhang_fan_speed": [
        "90"
      ],
      "additional_cooling_fan_speed": [
        "0"
      ],
      "chamber_temperatures": [
        "0"
      ]
    },
    "format": "Reference extract only; not an importable Bambu Studio preset."
  }
]